Capabilities and Facilities

Facilities
AmPharmCo’s FDA registered cGMP facility occupies approximately 37,000 sq. ft. on a 5-acre site. The site is located in the Carter Industrial Park, in Fort Worth, Texas. Plans for facility expansion are based on scale-up manufacturing projects.

Validated, Five Point of Use Reverse Osmosis System provides 8 gallons per minute of USP Purified Water for manufacturing requirements.

Facility-wide HVAC System provides controlled environment for manufacturing and warehousing, including a low humidity, dust controlled area for tablet manufacturing.

Capabilities
Research & Development capabilities available for small bench-top batches.

Liquid Dosage Forms
Manufacturing vessels with various mixing types, and jacketed tanks for heating requirements in sizes from 25 to 2,000 gallons are available for pilot development to scale-up commercial sized batches

Versatile liquid filling lines are available for 1 ounce to 2.5 gallon fill sizes over wide viscosity range of liquids, creams, lotions and suspensions.

Gel filling lines for filling gel type products, creams and ointments from 7.5 grams to 8 ounce fill sizes.

Large capacity filling line for 5 gallon to 55 gallon drums or totes.

Filling speeds:
128 oz (gallons) - 2,000 gallons per shift
8 oz bottles - 12,000 to 14,000 bottles per shift
5 oz tubes - 13,000 to 15,000 tubes per shift

Solid Dosage Forms
A 2,500 sq. ft. tablet manufacturing and filling area is available with capacity for manufacturing dry granulations and direct compression tablets. Approximate available capacity is 150 - 300 kg granulation batches, and approximately 6,000 60-count bottles of 500 - 2500 milligram tablets per day. Other capabilities available depending on tablet size and # tablets/bottle.